Observe general information regarding electrical installation and maximum power input.
Assembly pliers required.
1. Connect the luminaire
correctly to the feed of the led-driver (constant feed, max.
350mA). The led-driver must be disconnected from the power
supply! It is essential to ensure that the constant current source
has been disconnected from the mains for at least 10-15
seconds before lights are connected!
2. Use fuse tongs (ArtNr. 168101) to insert luminaire into bayonet
mechanism. Carefully rotate DOT 28 by 90° to the right and pull
down until it sits flush with the ceiling.
To de-install, lift DOT 28 and rotate counter-clockwise by 90°.
CAUTION: Provide at least 1dm³ airspace for DOT 28. Observe minimum
installation depth. Do not cover with insulation material, steam brake, fleece or film!
