• DOT 28
  • DOT 28 WET
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28 POWER
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
  • DOT 28
DOT 28DOT 28 WETDOT 28DOT 28DOT 28DOT 28DOT 28DOT 28DOT 28DOT 28 POWERDOT 28DOT 28DOT 28DOT 28DOT 28DOT 28DOT 28DOT 28DOT 28DOT 28DOT 28
WALL

DOT 28

Flush-mounted into the ceiling, this source of light is almost invisible. An abundance of light streams from a single spot. Masterfully crafted reflectors create beautiful cones of light in the room, casting dainty shadows and adding brilliance to any material. Depending on the installation module, minimum installation depth of 60 mm.

circularity certified


INSTALLATION
CONFIGURATOR
SUSTAINABILITY

DOT 28

FRAMELESS INTEGRATION. Flush-mounted into the ceiling, this source of light is almost invisible. An abundance of light streams from a single spot. Masterfully crafted reflectors create beautiful cones of light in the room, casting dainty shadows and adding brilliance to any material. Dot 28 emanates a soft, atmospheric light. A system for simple, yet sophisticated lighting that lets a room speak for itself.


DOT 28 GLARE SUPPRESSION RING

The glare suppression ring refines the excellent light quality of the DOT 28 even further and creates a pleasant glare-free light. Due to a UGR value <19 and <22, this version is also suitable for workstations. The glare suppression ring makes the source of light disappear to the extent that you won´t know where the light comes from. "We make visible without being visible".


DOT 28 FADE RING

Invisibility in absolute perfection. The innovation of the glare ring renders the luminaire almost invisible during the day. In the evening, an intricate speck of light appears. We reduce the source of light to the point that it seems to disappear, allowing the DOT 28 to reveal the full quality of its light upon activation.


DOT 28 POWER

HIGH PERFORMANCE MEETS INSPIRATION. When a 28 mm spot puts out more than 700 lumen of light, a special kind of beauty unfolds: a powerful yet soft cone of light fills the room. Simply inspirational. This extraordinary performance is made possible by a longer cooling element and can be increased further by an additional cooling surface, in some cases leading to an output of almost 1000 lm.

>>> To DOT 28 POWER


DOT 28 WET

DOT 28 also provides a calm ceiling mirror and beautiful light in covered outdoor areas or bathrooms: with DOT 28 WET - splash-proof on all sides IP44.


DOT 28 CONE

MINIMALISTICALLY EXPRESSIVE. Almost immaterial, DOT 28 CONE gives the ceiling depth articulated with geometrical precision and creates a subtle relief by playing with minimal height and deep recesses. The precisely milled cone recedes deeper into the ceiling than the upstand protrudes: full presence paired with glare-controlled restraint.
>>> To DOT 28 CONE
>>> To DOT 28 POWER CONE


DIM TO WARM

Seamless transitions from brightness to atmospheric candlelight: With a perfect dimming curve, high light brilliance and high colour rendering (RA96), SYSTEM DOT 28 creates undreamt-of atmospheres
>>> More about DIM TO WARM


LENS 15°

SYSTEM DOT 28´s smallest light housing concentrates and projects light into the room with maximum brightness, but minimal scattering. A versatile instrument for staging objects and focusing light.
>>> More about LENS 15°


DOT 28 - frameless in all kinds of ceilings.



Item No. Luminaires
2781_ _ _ DOT 28 | for flush-mounting in SYSTEM DOT 28, solid aluminium, passive cooling
400 lm | 350 mA | 4W*
3781_ _ _ DOT 28 WET | IP44, for flush-mounting in SYSTEM DOT 28, splash-proof on all sides, solid aluminium, passive cooling
370 lm | 350 mA | 4W*
168101 ASSEMBLY PLIERS | circlip pliers, DOT 28, WALL 28, DOT SLIM and VERSA installation aid


278020
278025
278030
278035
278040
278045
278013
REPAIR SET, for DOT 28, ORB 28, MOL 28, DOT 28 POWER, DOT 35 and DOT 35 POWER, for authorized electricians
2700 K
2700 K B35 for lens
3000 K
3000 K B35 for lens
4000 K
4000 K B35 for lens
1800-2700 K @350mA
* excl. LED-Driver; constant current
CONFIGURE ONLINE

Add the following specifications to your order:

Item No. Lens
1 _ _ Beam angle 15°
Item No. Reflector
3 _ _ Beam angle 35°
6 _ _ Beam angle 55°
Item No. LED
_ 1 _ DIM TO WARM | RA 96 | 1800 - 2700K @350mA
_ 2 _ RA 93 | 2700 K
_ 3 _ RA 93 | 3000 K
_ 4 _ RA 93 | 4000 K
Item No. Colour
_ _ K Kaschmeregold
_ _ S Snow silver
_ _ T Total black
_ _ R Rose
_ _ G Gold
_ _ M Muscat bronze
_ _ P Polar white (equals RAL 9016)
_ _ E Glare suppression ring | total black, anodised aluminium | UGR <10 at LENSE 15° | UGR <19 at 35° | UGR <22 at 55° @350 mA
Installation depth ET = module installation depth +10 mm. Luminous flux diminishes by approx. 20%
_ _ A Fade ring | polar white + total black center | UGR <10 at LENSE 20° | UGR <19 at 35° | UGR <22 at 55° @350mA
Installation depth ET = module installation depth +10 mm. Luminous flux diminishes by approx. 20%
REPURCHASE RECYCLING CIRCULAR ECONOMY
Item No. LED-Driver 350mA
299003 ON-OFF | 4,2W 350mA² | 1 LED³ | not dimmable
LWH 38x27x21mm
399023 ON-OFF | 25W 350mA | 1-4 LEDs | not dimmable
LWH 147x40x32mm
299223 DALI-2 | PUSH 25W 350mA | 1-4 LEDs | dimmable 1-100%
LWH 147x40x32mm
399263 DALI-2 | PUSH | 1-10V 60W 350mA | 1-6 LEDs | except D2W: 1-5 LEDs | dimmable 1-100%
LWH 124x79x22mm

² cable length max. 33m at 0.75mm²
  Minimum diameter according to cable length
  0,75 mm² – 100 m; 1,5 mm² – 200 m

dimensions + light distribution




maximum current



References

References

Installation guide

Installation guide

INSTALLATION MODULES

Text hier einfügen

DRYWALL

Text hier einfügen

CONCRETE

Text hier einfügen

PLASTER

Text hier einfügen

WOOD

Text hier einfügen

INDEPENDENT

  • DOT 28 POWER
  • DOT 28 POWER
  • DOT 28 POWER
  • DOT 28 POWER
  • DOT 28 POWER
  • DOT 28 POWER
DOT 28 POWERDOT 28 POWERDOT 28 POWERDOT 28 POWER DOT 28 POWER DOT 28 POWER
WALL

DOT 28 POWER

HIGH PERFORMANCE MEETS INSPIRATION. When a 28 mm spot puts out more than 700 lumen of light, a special kind of beauty unfolds: a powerful yet soft cone of light fills the room. Simply inspirational. On the other hand, the light output can be further increased by extending the cooling surface, resulting in an output of over 1000 lm depending on the installation situation.

circularity certified


INSTALLATION
CONFIGURATOR
SUSTAINABILITY


Item No. Luminaires
2782_ _ _ DOT 28 POWER | for flush-mounting in SYSTEM DOT 28, solid aluminium, passive cooling, installation depth ET = module installation depth + 50 mm except for capsules
740lm | 700mA | 8,5W*
With EXTENDED COOLING SURFACE* in concrete, current supply with 1000 mA is possible: 990lm | 1000mA | 12W*




3782_ _ E
3782_ _ A
DOT 28 POWER WET | IP44, for flush-mounting in the SYSTEM DOT 28, splash-proof on all sides, solid aluminium, passive cooling, module installation depth ET + 60 mm except for capsules
560lm | 700mA | 8,5W*
Glare supresssion ring total black
Fade ring polar white with total black center
208900 EXTENDED COOLING SURFACE | for capsules with higher current feed, see installation instructions, for DOT 28 POWER
208901 ADJUSTMENT IRON | for extended cooling surface, for alignment of the cooling mandrel, in case it was set in concrete at an angle
168101 ASSEMBLY PLIERS | circlip pliers, DOT 28, WALL28, DOT SLIM and VERSA installation aid


278020
278030
278040
REPAIR SET, for DOT 28, ORB 28, MOL 28, DOT 28 POWER, DOT 35 and DOT 35 POWER for authorized electricians
2700K
3000K
4000K
* excl. LED-Driver; constant current
CONFIGURE ONLINE

Add the following specifications to your order:

Item No. Reflector
3 _ _ Beam angle 35°
6 _ _ Beam angle 55°
Item No. LED
_ 2 _ RA 93 | 2700K
_ 3 _ RA 93 | 3000K
_ 4 _ RA 93 | 4000K
Item No. Colour
_ _ K Kaschmeregold
_ _ S Snow silver
_ _ T Total black
_ _ R Rose
_ _ G Gold
_ _ M Muscat bronze
_ _ P Polar white (equals RAL 9016)
_ _ E Glare suppression ring | total black, anodised aluminium
Installation depth ET = module installation depth +10 mm, only for DOT 28, DOT 28 POWER, DOT 35 and DOT 35 POWER. Luminous flux diminishes by approx. 20%
_ _ A Fade ring | polarwhite + total black center
Installation depth ET = module installation depth +10 mm, only for DOT 28, DOT 28 POWER, DOT 35 and DOT 35 POWER. Luminous flux diminishes by approx. 20%
REPURCHASE RECYCLING CIRCULAR ECONOMY
Item No. LED-Driver 700mA (depending on the mounting situation)
299037 ON-OFF 35W 700mA | 1-3 LEDs | not dimmable
LWH 148x40x30mm
299227 DALI-2|PUSH 25W 700mA | 1-2 LEDs | dimmable 1-100%
LWH 147x40x32mm
399267 DALI-2|PUSH|1-10V 60W 700mA | 1-5 LEDs | dimmable 1-100%
LWH 124x79x22mm
Item No. LED-Driver 1000mA
(with extended cooling surface item No. 208900, in concrete)
399261 DALI-2|PUSH|1-10V 60W 1000mA | 1-4 LEDs | dimmable 1-100%
LWH 124x79x22mm
  Minimum diameter according to cable length
  0,75mm²-100m; 1,5mm²- 200m

dimensions + light distribution




maximum current



References

Text hier einfügen

Installation guide

Text hier einfügen

Installation modules

Text hier einfügen

DRYWALL

Text hier einfügen

DRYWALL

Text hier einfügen

PLASTER

Text hier einfügen

WOOD

Text hier einfügen

INDEPENDENT

  • DOT 28 CONE
  • DOT 28 CONE
  • DOT 28 CONE
  • DOT 28 CONE
DOT 28 CONEDOT 28 CONEDOT 28 CONEDOT 28 CONE
WALL

DOT 28 CONE

SOFT FASCINATION. New design freedom for a classic. DOT 28 CONE nestles flush and seamlessly against the ceiling surface. The lifting slope integrated into the new bayonet creates a fascinating aesthetic. Focused light, high-quality reflectors, and enhanced glare suppression ensure brilliant lighting moods. DOT 28 CONE thus has a dual effect – architectural and scenographic.

circularity certified


INSTALLATION
CONFIGURATOR
SUSTAINABILITY

Art.Nr. Leuchten
2771_ _ _ DOT 28 CONE | semi-recessed luminaire for installation in SYSTEM DOT 28, solid aluminum, passive cooling
400lm | 350mA | 4W*
3771_ _ _ DOT 28 CONE WET | IP44, semi-recessed luminaire for installation in SYSTEM DOT 28, splash-proof on all sides, solid aluminum, passive cooling
370lm | 350mA | 4W*


278020
278025
278030
278035
278040
278045
278013
REPAIR SET, für DOT 28, ORB 28, MOL 28, DOT 28 POWER, DOT 35 und DOT 35 POWER, for authorised electricians
2700 K
2700 K B35 for lens
3000 K
3000 K B35 for lens
4000 K
4000 K B35 for lens
1800-2700 K @350mA
*exkl. LED-Driver; constant current
CONFIGURE ONLINE

Add the following specifications to your order:

Item No. Lens
1 _ _ Beam angle 15°
Item No. Reflector
3 _ _ Beam angle 35°
6 _ _ Beam angle 55°
Item No. LED
_ 1 _ DIM TO WARM | RA 96 | 1800 - 2700K @350mA
_ 2 _ RA 93 | 2700 K
_ 3 _ RA 93 | 3000 K
_ 4 _ RA 93 | 4000 K
Item No. Colour
_ _ K Kaschmeregold
_ _ S Snow silver
_ _ T Total black
_ _ R Rose
_ _ G Gold
_ _ M Muscat bronze
_ _ P Polar white (equals RAL 9016)
REPURCHASE RECYCLING CIRCULAR ECONOMY
Item No. LED-Driver 350mA
299003 ON-OFF | 4,2W 350mA² | 1 LED | not dimmable
LWH 38x27x21mm
399023 ON-OFF | 25W 350mA | 1-4 LEDs | not dimmable
LWH 147x40x32mm
299223 DALI-2 | PUSH 25W 350mA | 1-4 LEDs | dimmable 1-100%
LWH 147x40x32mm
399263 DALI-2 | PUSH | 1-10V 60W 350mA | 1-6 LEDs | except D2W: 1-5 LEDs | dimmable 1-100%
LWH 124x79x22mm

² cable length max. 33m at 0,75mm²
  Minimum diameter according to cable length
  0,75 mm² – 100 m; 1,5 mm² – 200 m

dimensions + light distribution




maximum current



Installation guide

Text hier einfügen

Installations modules

Text hier einfügen

DRYWALL

Text hier einfügen

CONCRETE

Text hier einfügen

PLASTER

Text hier einfügen

WOOD

Text hier einfügen

INDEPENDENT

  • DOT 28 POWER CONE
  • DOT 28 POWER CONE
  • DOT 28 POWER CONE
DOT 28 POWER CONEDOT 28 POWER CONEDOT 28 POWER CONE
WALL

DOT 28 POWER CONE

POWERFUL ELEGANCE. Softness meets precision and high light output. DOT 28 POWER CONE delivers amazing results for sophisticated lighting solutions with high requirements. Powerful, precise light traces the depth of the room and makes surfaces and materials shine. The cone provides additional glare suppression and opens up a wide range of design options.

circularity certified


INSTALLATION
CONFIGURATOR
SUSTAINABILITY

Art.Nr. Luminaires
2772_ _ _ DOT 28 POWER CONE | semi-recessed luminaire for installation in SYSTEM DOT 28, solid aluminum, passive cooling, installation depth ET = module installation depth + 60mm, except for capsules,
740lm | 700mA | 8,5W*
With EXTENDED COOLING SURFACE* in concrete, current supply with 1000 mA is possible:: 990lm | 1000mA | 12W*
208900 EXTENDED COOLING SURFACE | for capsules with higher current feed, see installation instructions, for DOT 28 POWER
208901 ADJUSTMENT IRON | for extended cooling surface, for alignment of the cooling mandrel, in case it was set in concrete at an angle
168101 ASSEMBLY PLIERS | circlip pliers, DOT 28, WALL28, DOT SLIM and VERSA installation aid


278020
278030
278040
REPAIR SET, for DOT 28, ORB 28, MOL 28, DOT 28 POWER, DOT 35 and DOT 35 POWER for authorized electricians
2700K
3000K
4000K
* excl. LED-Driver; constant current
CONFIGURE ONLINE

Add the following specifications to your order:

Item No. Reflector
3 _ _ Beam angle 35°
6 _ _ Beam angle 55°
Item No. LED
_ 2 _ RA 93 | 2700K
_ 3 _ RA 93 | 3000K
_ 4 _ RA 93 | 4000K
Item No. Colour
_ _ K Kaschmeregold
_ _ S Snow silver
_ _ T Total black
_ _ R Rose
_ _ G Gold
_ _ M Muscat bronze
_ _ P Polar white (equals RAL 9016)
REPURCHASE RECYCLING CIRCULAR ECONOMY
Item No. LED-Driver 700mA (depending on the mounting situation)
299037 ON-OFF 35W 700mA | 1-3 LEDs | not dimmable
LWH 148x40x30mm
299227 DALI-2|PUSH 25W 700mA | 1-2 LEDs | dimmable 1-100%
LWH 147x40x32mm
399267 DALI-2|PUSH|1-10V 60W 700mA | 1-5 LEDs | dimmable 1-100%
LWH 124x79x22mm
Item No. LED-Driver 1000mA
(with extended cooling surface item No. 208900, in concrete)
399261 DALI-2|PUSH|1-10V 60W 1000mA | 1-4 LEDs | dimmable 1-100%
LWH 124x79x22mm
  Minimum diameter according to cable length
  0,75mm²-100m; 1,5mm²- 200m

dimensions + light distribution



maximum current



Installation guide

Text hier einfügen

Installations modules

Text hier einfügen

DRYWALL

Text hier einfügen

CONCRETE

Text hier einfügen

PLASTER

Text hier einfügen

WOOD

Text hier einfügen

INDEPENDENT