Installation DOT 28 Balda


MAXIMUM LOAD 1 TO 10 KG, DEPENDING ON CABLE AND MODULE

1. Tighten BALDA bayonet mechanism hand-tight to luminaire cable.

2. (OPTIONAL) Screw hole for rope suspension provided in bayonet mechanism using a 1.5mm drill.

3. (OPTIONAL) Run luminaire wire through hole and adjust to desired length.

4. Push bayonet mechanism up with slotted screwdriver and rotate clockwise by 90°, then pull downwards until it locks into place.

To de-install, lift bayonet mechanism and rotate counter-clockwise by 90°.

For a rope suspension use BALDA S (Item No. 167050)