2. (OPTIONAL) If you use a mini LED-driver for a luminaire, please connect it before mounting the cavity bracket. Observe an additional air space. For the TRIM FLAT 68-28, the LED drivers 399023, 299223, 299225 and 299227 also fit through the Ø68mm hole with an installation depth of min. 120mm.
3. Insert the cavity bracket into the hole. Use a 1,5m allen key to turn thethe two fastening screws anticlockwise
until the cavity bracket is secured. To ensure that the hexagon socket of the fastening screw is not overtightened, this must be done with a little strength.
4. Now mount your component of the DOT 28 System using the bayonet lock.
Observe general information regarding installation of DOT 28 luminaires and maximum current feed: At least 1dm³ of air space must be provided for the DOT 28 and 5dm³ for the DOT 28 Power. The minimum installation depth must be observed. The luminaire must not be insulated or covered with a vapor barrier, fleece or foil!
