Installation ORB 28, MOL 28, CONO 28, CERA PENDULA, CERA C PENDULA


HANDLE LUMINAIRE CABLE WITH CARE! DO NOT BEND SHARPLY, DANGER OF KINKING!
DO NOT REMOVE PROTECTIVE TUBE BEFORE COMPLETING INSTALLATION!

1. Adjust and carefully secure cable length using the two socket screws. Install pendant luminaire according to the installation manual enclosed.
Push bayonet mechanism up with slotted screwdriver and rotate clockwise by 90°, then pull downwards until it locks into place.

2. After setting the right length, use enclosed blade and carefully open side of protective tube.

3. Cut protective tube just below bayonet mechanism.

4. Carefully remove protective tube from cable.

CAUTION: Mesh cable is under low voltage and must not touch any metal elements below or within the ceiling.

HOT PLUG DANGER! Separate from power supply at least 10 –15 seconds before installation.