2.Connect the luminaire correctly to the feed of the LED driver (constant feed). The led-driver must be disconnected from the power supply! It is essential to ensure that the constant current source has been disconnected from the mains for at least 10-15 seconds before lights are onnected.
3. Push the springs attached to the
lighting module back and insert the luminaire into the opening provided.
CAUTION: Provide enough airspace for the cooling element. Observe minimum installation depth. Do not cover with insulation material, steam brake, fleece or film!
Installation also applies to DOT 35 and DOT 35 POWER with glare supression, fade ring or CONE.
