1. Connect the luminaire correctly to the feed of the
led-driver (series circuit, max. 350mA). The led-driver must be
disconnected from the power supply!
2. Insert the luminaire into the bayonet mechanism of the ceiling
outlet. Carefully rotate CERA 28 by 90° to the right and pull down
until the mounting sits flush with the ceiling.
OPTION WALL INSTALLATION:
For wall-installation the supplied rubber bullets can be
pressed into the prepared holes in the cooling element.
To de-install, lift CERA 28 and rotate
counter-clockwise by 90°.
CAUTION: Separate from power supply at least 10 –15 seconds before installation.
