Installation Verve

1. Make sure the recess of the luminaire remains clean and undamaged during the whole process.
2. Screw the luminaire module onto the same substructure as the plasterboard (12.5 mm). If there is double plating, make sure there is an adequate recess in the first plasterboard plating.
3. Put some fabric tape into the spatula border intended therefor. Finish the joints cleanly and neatly and use a filler which is elastic enough.
4. Ground and apply the paint on the luminaire. (Best use a small structured roll.)
The luminaire is not suitable for outside.

Don’t use the luminaire on coarse-grained plaster!