Installation DOT 28 Balda

MAXIMUM LOAD 1 TO 10 KG, DEPENDING ON CABLE AND MODULE
1. Tighten BALDA bayonet mechanism to luminaire cable hand-tight. (OPTIONAL 1) Screw hole for rope suspension provided in bayonet mechanism, using a 1.5mm drill.
(OPTIONAL 2) Run luminaire wire through hole and adjust to desired length.
2. Push bayonet mechanism up with slotted screwdriver and rotate clockwise by 90°, then pull downwards until it locks into place.
To de-install, lift bayonet mechanism and rotate counter-clockwise by 90°.
For a rope suspension use BALDA S (Art.Nr167050).